Reynaers Aluminium ConceptWall 50

Share this article

ConceptWall® 50 is a facade and roof system that offers unlimited design freedom and allows maximum transparency. As such, ConceptWall 50 meets all requirements of contemporary architecture. Innovative solutions contribute towards the tendency of big, heavy and thick glass panes. The system supports up to 700 kg in various glass support configurations. Even higher glass weight can be offered in bespoke solutions.

The system is available in several design and glazing variants, like steel beam look, standard pressure plates, structurally glazed and structurally clamped solutions. Specified levels of fire-resistance, burglar proof classes and thermal insulation, down to Uf = 0.56W/ m2K, are provided by different variants.
In addition to that, dedicated opening types can also be seamlessly integrated; a parallel opening window, a top hung window, a hidden vent turn and tilt window, but also an attic window for integration in roof ap- plications of ConceptWall 50. Inward opening windows can be combined with the integrated vertical sun protection screens, a co-development with the specialists at Renson.

The ConceptWall 50 stands for an extensive range of profiles, gaskets, accessories and tools. It is specially developed for easy fabrication and installation.

The extensive range of CW 50 profiles meets all requirements of contemporary architecture. With regard to the thermal performance, the system offers solutions in different levels, allowing the use of triple glazing and making the system even applicable for passive house or low energy buildings.

Opening elements with impressive performances and looks can be seamlessly integrated into the façade.

Available opening types:

Outward opening

The outward opening elements for CW have been completely redesigned. The elements are now better thermally insulated, capable of reaching the maximum dimensions in all variants, reach better performances overall, can be fitted with triple glass in both glazing bead and structural

glazed variants, can be combined with all ConceptWall 50 variants and feature an improved production ease and speed.

They are available in 2 variants – Top Hung or THW (1.) and Parallel Opening or POW (2.) – both available with glazing bead, structural glazed and structural glazed stepped versions – can be motorized by chain drive. The reduced operating forces also allows a smooth manual operation with a large choice of handles. The opening can be restricted to suit local needs and regulations such as fall protection and Smoke & Heat Exhaust Ventilation Systems.

Although the THW is more commonly known and used and has its advantages (e.g. manually operated elements can be wider), the concept of a POW allows an ultimate airflow for small or tall windows. It can improve natural ventilation with the same window surface, which increases thermal comfort and a healthy indoor climate for building users. Aesthetically, a parallel way of opening gives a uniform impression: the reflection of the building remains the same for opened or closed sashes. A Parallel Opening Window allows an ultimate airflow for small or tall windows. This results in a better natural ventilation, improving the indoor air quality, thermal comfort and healthy indoor climate for building users.

The glass roof Attic Window (3.) variant has been fully reviewed to meet today’s standards to provide a perfect water tight and high
insulating solution for outward opening elements in inclined to nearly horizontal glass roofs. Different glazing options are available:
either a cost efficient glazing bead version for standard glass, or a more aesthetic version with stepped glass. Both glass variants can
be combined to create a zero water threshold on the bottom side to allow inclinations down to 5°. The superior High Insulation variant assures an increased insulation by using additional gaskets and smart insulation strips including low-e foil. The possibility to integrate 62 mm glass in this HI version further enhances thermal efficiency. A motor-operated version is especially convenient within building management systems or in roof windows in hard- to-reach places. The Attic window can be applied together with ConceptWall 50-RA, ConceptWall 60-RA and the ConceptRoof 120 conservatory system.

Inward opening

A special type of Inward Opening Window, also known as the Hidden Vent or HV (4.), is a structural sealed glazing solution which can be applied in a standard curtain wall facade or in a structurally clamped facade. It’s main advantage it is indistiguishable from a fixed panel from the outside, therefore it doesn’t affect the facade geometry. From the inside, this system uses a half mullion, resulting in a minimal visible width. Water tightness is assured by the use of a central gasket.

Integrated sun protection screens (co-development with Renson) are available in combination with the inward opening windows, as well as fixed facades.
Integration of Reynaers Aluminium window and door systems


Several aesthetical connection profiles allow a concealed integration of other Reynaers Aluminium window and door systems.

CW 50-HI is certified by the German notified body ift Rosenheim for passive house applications. This certification requires an overall insulation value of max. 0.7 W/m2K using glass with Ug 0.7 W/m2K and a panel with Up of 0.25 W/m2K. With the CW 50-HI profiles, the curtain wall system achieved the overall insulation value of 0.66 W/m2K.

Advanced Glass - Specialists in high-performance, thermally broken glazing, glass, metal and composite cladding

ConceptWall® 50 PDF

To download your copy of the ConceptWall® 50 PDF please click the button below.  An email with a download link will be sent to you promptly.

Send download link to:

Tags: Latest News
The PURe® Window Range by Senior Architectural Systems
ConceptWall® 60 Solution for Heavy Glass Panes

You May Also Like

TECHNAL Stormframe STII Commercial Door

TECHNAL Stormframe STII SYSTEM AND HARDWARE WORKING TOGETHER Since its launch, the STII door has been recognised as an exceptional product in terms of performance and fabrication. STII offers the best option for you and your customers, providing an ideal…
Advanced Glass - Specialists in high-performance, thermally broken glazing, glass, metal and composite cladding

TECHNAL: Tental – The Circular Facade

TENTAL – THE CIRCULAR FACADE WITH TENTAL, ARCHITECTS CAN NOT ONLY IMAGINE THE WORLD WE ALL WANT, THEY CAN ALSO BUILD IT. MORE POSSIBILITIES The TENTAL curtain wall was created with a view to offering architects and consultants an extensive…
Advanced Glass - Specialists in high-performance, thermally broken glazing, glass, metal and composite cladding

ConceptWall® 60 Solution for Heavy Glass Panes

Concept Wall® 60 is an excellent thermally insulated curtain wall system for robust structure of large glass surfaces, that answers even to the specific needs of sloped or curved constructions. This modular system is designed with intelligently reinforced profiles, allowing…
Advanced Glass - Specialists in high-performance, thermally broken glazing, glass, metal and composite cladding